Home » Previous Page » Article:

Handling Eggs Before Setting In The Incubator

Handling Eggs Before Setting In The Incubator

University of Illinois Extension

Article Source: Click Here

Handling Eggs Before Setting in Incubator

There are a number of variables with eggs that may cause their loss. The eggs may not be fertile. They may have been kept at improper room temperature prior to incubation, turned, or sprinkled with water. They may not have passed proper weight inspection, or a non-calibrated thermometer may have been used in the incubator. Or other combination of reasons may cause your eggs not to hatch.

Before setting eggs:

  1. Test the incubator before picking up the fertile eggs.
  2. Assume the eggs are fertile when they were laid and the breeders have been fed a good breeder diet, the next consideration of importance in preserving the hatchability is keeping them cool and humid. Temperatures between 40 and 60 degrees F are desirable.
  3. Store in the open atmosphere. This is acceptable, provided there are not several days of intense summer heat. The fertility of the eggs are shortened by high temperature. A good rule of thumb is: The earlier the eggs are incubated, the better.
  4. Keep eggs at room temperature for at least twelve hours before setting them in your incubator.
  5. Keep chicken eggs dry.
  6. Final Check for a Successful Hatch
    Run your incubator without any eggs for 24 to 48 hours, regulating and checking the internal temperature and humidity.

Return to Resources

Tags:   Hatching Eggs & Raising Chickens    Incubators/Incubating/Brooders    eggs    incubator    temperature    setting    fertile    eggs fertile    room temperature    setting incubator    resources    cause    room    hours    hatch    store    60    atmosphere    several    degrees    shortened high temperature    high temperature    high    shortened    heat    fertility    summer    thumb    days    intense    rule    desirable
 PDF  Print this article
Rating: 0.00 (0 votes) Rate this article
Bookmark and share this article: